Parking Position - Mercedes-Benz 2013 C-Class W204 Sedan Owner's Manual

i If the exterior mirrors have been folded in
manually, they do not fold out.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows.
X
Vehicles without electrically folding
exterior mirrors: move the exterior mirror
into the correct position manually.
X
Vehicles with electrically folding exte-
rior mirrors: press and hold the mirror-
folding button until you hear a click and
then the mirror engage in position
( Y page 122).
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( Y page 121).
Automatic anti-dazzle mirrors
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
dazzle mode if the following conditions are
met simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror
The mirrors do not go into anti-dazzle mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position of the exterior mirror
on the front-passenger side
Setting and storing the parking position
Using reverse gear
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
X
Make sure that the vehicle is stationary and
that the key is in position 2 in the ignition
lock.
X
Press button ; for the exterior mirror on
the front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button = to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the kerb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
Using the memory button
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
This setting can be stored using memory but-
ton M ?.
X
Make sure that the key is in position 2 in
the ignition lock.
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
kerb should be visible.
Mirrors
123
Z