PERIODIC MAINTENANCE AND MINOR REPAIR
1. Fuse block
2. Main fuse
3. Spare main fuse
Replacing the fuses
The fuses are located behind panel B.
6
(See page 6-6 for panel removal and
installation procedures.)
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
4. Carburetor heater fuse
EAU00825
5. Spare fuse
Specified fuses:
Main fuse:
Ignition fuse:
Signaling system fuse:
Headlight fuse:
Carburetor heater fuse:
CAUTION:
@
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
@
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
30 A
10 A
10 A
15 A
15 A
6-31
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
EC000103