Table of Contents
Advertisement
Message Display (continued)
Internal error
•
LED indicators
POWER lamp
Blink (Green)
Messages
•
Message
An error has occurred.
Unplug/replug the power
cord, then repower the
2
unit. (Fxx
)
2 Numbers and/or letters will appear in place of xx.
Others
•
LED indicators:
•
Messages
Message
Cannot print more than
999 images.
The number of copies
exceeded.
• Unable to display or
print this image. (U3C)
• Unable to print. (U3E)
No card. (U35)
• Unable to use this
card. (U36)
• Unable to read this
card. (U39)
68
ERROR lamp
Blink (Red)
• An internal hardware error has occurred. Unplug the
AC adaptor from the power supply once, reconnect,
and turn the unit on again. If the error has not
cleared, please consult your dealer.
No special indication.
• Up to 999 copies can be printed at once when
printing all images or printing using DPOF settings.
Select the images and set the total number of copies
to 99 or less. Then print again.
• Up to 99 copies can be printed at once. Select the
images and set the total number of copies to 99 or
less. Then print again.
• The image you attempted to print has an
unsupported format or is broken.
• Blank paper may come out instead of printed
images.
• Insert a memory card.
• You are using a memory card that is not compatible.
Memory cards formatted by a computer may not
be able to be used. Be sure to use memory cards
formatted by a digital camera.
ACCESS lamp
Remedy
Remedy
PRINT lamp
Page
—
Page
26
32
35
26
70
21
70
Advertisement
Table of Contents
