Miele PT 5135 C OS Operating And Installation Instructions page 24

Table of Contents

Advertisement

Short instructions
Low temperature button
^ For drying particularly sensitive
fabrics (care symbol r), e.g.
acrylics, press the Low temperature
button.
Because the heater rating is reduced
for the Low temperature setting, clothes
dry more slowly thus lengthening drying
times.
+ button
^ See "Delay start".
Coin operation
If your machine has a payment system,
the amount of credit required will
appear in the display.
Opening the door or cancelling the
programme after it has started may
cause loss of credit (depending on
how the machine was set up).
D Start the programme
The indicator for the Start button will
flash as soon as a programme can be
started.
^ Press the Start button.
– Prog. running will appear in the
display, followed by Drying and the
programme duration.
– With programmes with drying levels,
e.g. Machine iron, Hand iron etc.,
the drying level reached will be
shown in the display later on.
24
Changing the programme sequence
Further information about the following
can be found under "Changing the
programme sequence":
– Coin box
– Changing a programme once it has
started
– Cancelling the current programme
– Adding or removing laundry after a
programme has started
– Power cuts
– Time left
Programme duration/Estimated time
left
When a programme is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics assess conditions in the
dryer and adjust the estimated time
remaining for a more accurate reading.
Because of this, the time displayed can
alter during the course of a programme.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents