Panasonic Toughbook CF-28 Series Operating Instructions Manual page 11

7
Dual OS
Select the Operating System
Windows 2000 and Windows XP are preinstalled on the computer. After one of them is
selected with the following procedure, only that operating system can be used.
At the screen for the agreement of the selection of the operating system, press Y .
1
With the number keys, select either Windows 2000 or Windows XP.
2
(The selection of the operating system is only performed the first time the com-
puter is started up. A change cannot be made after the selection.)
At the confirmation message, press Y . The operating system preparation will
3
start, during which the computer will restart.
CAUTION
Do not touch the keyboard. If you accidentally touch the keyboard and the
cancel confirmation menu is displayed, do not cancel.
When the screen indicating the completion of the operating system preparation is
4
displayed, press any key.
The computer will restart.
8
Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad.
NOTE
<Only for models with 13.3 type LCD>
During the Windows setup procedure, the desktop will be displayed as a small
screen in the center of the LCD. After the setup procedure is completed and the
computer is restarted, the desktop will be displayed as a full screen.
Windows 2000
CAUTION
Do not press any key or move the touch pad until [Windows 2000 Professional
Setup] is displayed.
At the [Welcome to the Windows 2000 Setup Wizard], select [Next].
1
After reading the agreement, select [I accept this agreement] or [I don't accept
2
this agreement], then select [Next].
NOTE
If [I don't accept this agreement] is selected, the Windows setup will be
aborted.
Select settings for your region, then select [Next].
3
Enter your name and organization and then select [Next].
4
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows 2000 can-
not be operated.
6 Enter the correct date, time and time zone and then select [Next].
You can also complete these settings at a later time.
7 Enter your administrator password and then select [OK].
<Only for models with touchscreen>
If the cursor can not be pointed correctly with the stylus, perform [Calibration] in
[Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen].
11