Table of Contents
Advertisement
Specifications
Engine
STIHL single cylinder two-stroke engine
Displacement:
41.6 cm
Bore:
42 mm
Stroke:
30 mm
Engine power to
2.1 kW (2.9 HP)
ISO 7293:
at 9,500 rpm
Idle speed:
2,800 rpm
High speed setting
when performing
repairs (with bar and
chain):
13,000 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
Bosch WSR 6 F,
type):
NGK BPMR 7 A
Electrode gap:
0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Chain Lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Oil tank capacity:
MS 240
Weight
dry, without bar and chain:
Cutting Attachment
Rollomatic guide bars
3
Bar lengths (0.325"
pitch)
Groove width:
.325" saw chain
Rapid Micro Comfort 3 (26 RMC3)
Rapid Micro Comfort (26 RMC),
Rapid Super Comfort (26 RSC)
Pitch:
Drive link gauge:
Chain sprocket
7-tooth for .325"
Noise and Vibration Data
Noise and vibration data measurements
include idling, full load and rated
maximum speed with the same duration
of exposure.
For further details on compliance with
Vibration Directive 2002/44/EC see
0.46 l
www.stihl.com/vib/
Sound pressure level L
ISO 7182
101 dB(A)
Sound power level L
0.29 l
109 dB(A)
Vibration measurement a
ISO 7505
Left handle:
4.7 kg
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
32, 37, 40 cm
1.6 mm
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
.325" (8.25 mm)
For information on compliance with the
1.6 mm
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to
peq
to ISO 9207
weq
English
to
hv,eq
2
3.4 m/s
2
4.4 m/s
2
43
Hide quick links:
Advertisement
Table of Contents
