Specifications - Stihl MS 362 C-Q Instruction Manual

English

Specifications

Engine
STIHL single cylinder two-stroke engine
MS 362 C
Displacement: 59.0 cm
Bore: 47 mm
Stroke: 34 mm
Engine power to 3.4 kW (4.6 HP)
ISO 7293: at 9,500 rpm
Idle speed: 2,800 rpm
Max. permissible
speed (with cutting
attachment): 14,000 rpm
Ignition System
Electronic magneto ignition
Spark plug Bosch WSR 6 F,
(resistor type): NGK BPMR 7 A
Electrode gap: 0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston. Additional
manual oil flow control
46
Oil tank capacity:
Weight
Weight (dry, without bar and
chain):
Cutting Attachment
3
Rollomatic guide bars
Bar lengths
(3/8" pitch):
Groove width:
3/8" chains
Rapid Micro (36 RM) Type 3652
Rapid Super (36 RS) Type 3621
Rapid Super 3 (36 RS3) Type 3626
Pitch:
Drive link gauge:
Chain Sprocket
7-tooth for 3/8"
Noise and Vibration Data
Noise and vibration data measurements
include idling, full load and rated
maximum speed with the same duration
of exposure.
0.60 l
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
MS 362 C:
Sound power level L
0.325 l
MS 362 C:
Vibration measurement a
ISO 22867
6.0 kg
MS 362 C: 3.5 m/s
The K - factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K - factor in accordance
with Directive 2006/42/EC is 2.0 m/s
37, 40, 45, 50 cm
for the vibration measurement.
1.6 mm
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
3/8" (9.32 mm)
For information on compliance with the
1.6 mm
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to ISO 22868
peq
103 dB(A)
to ISO 22868
weq
114 dB(A)
to
hv, eq
Handle, left Handle, right
2 2
3.5 m/s
2
MS 362 C-Q