A Fault Message Appears In The Display - Miele PW 5082 Operating And Installation Instructions

A fault message appears in the display

Message in the
display
q
Drain
fault
p
Water intake
fault
,
Technical
Fault
A To switch off the fault message, press the OK button.
Possible cause
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
The water inlet is blocked
or restricted.
The hot option has been
selected for the Pre-wash
water, Main wash water or
Rinse water setting.
There is a fault.
Problem solving guide
Remedy A
Clean the drain filter and the
drain pump.
The maximum delivery head
is 1 m.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
Select the Cold water option
for these settings, see
"Settings/Supervisor level
menu".
Start the programme again.
If the fault message
appears again, contact the
Miele Service Department.
37