Checking The Condenser Unit (Heat Exchanger Unit); To Clean The Condenser Unit - Miele PT 7135 C Vario Operating And Installation Instructions

Cleaning and care
^ Pull the condenser (heat exchanger)
unit out of its housing by the handle.
Checking the condenser unit (heat
exchanger unit)
^ Hold the condenser unit up to the
light as shown.
^ Check to see if there is any lint inside
it. The arrows in the illustration above
indicate where to look.
If you cannot see any lint:
^ Replace the condenser unit (see
following page).
26
If you can see some lint:
^ Clean the condenser unit as
described below.

To clean the condenser unit

^ Use a shower head or similar to rinse
the unit out as shown.
– From the sides.
– From the front.
Lint is washed out by the water.