Cleaning And Care; Cleaning The Lint Filters; Cleaning Them While Dry - Miele PT 7135 C Vario Operating And Installation Instructions

Cleaning and care

Cleaning the lint filters

Lint from items being dried is collected
by the lint filters in the door and the
door opening. Clean the filters after
each drying program*.

Cleaning them while dry

^ Open the door and pull the lint filter
(1) out as illustrated.
^ Use your fingers or a vacuum cleaner
to remove the lint from the surface of
the filter.
22
^ Remove any lint from the hollow part
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele dealer or Miele or use a
vacuum cleaner.
^ Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^ Also clean the door seal (2) with a
damp cloth.
^ Use your fingers or a vacuum cleaner
to remove the lint from the two lint
filters in the door opening.
^ Close the door.
,
* The lint filters should be
checked and cleaned regularly but
always clean immediately the Clean
out airways message appears.