Table of Contents
Advertisement
Firmware v.1.0.2 (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camcorder or to reset your camcorder settings to the Factory Default
Settings.
1)
Press the MENU button to open the menus for the current mode.
2)
Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.
The "Set Defaults" is selected.
3)
4)
Press the OK button to reset the camcorder to the factory default settings.
5)
You will be asked to confirm the resetting to the factory default settings.
Select "No" to exit the menu and return to the previous mode without resetting to the default settings.
Select "Yes" and press the OK button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with the digital camcorder settings set to
the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system Language and Date/Time. If you do
not, the next time your camcorder is powered on, you will be prompted to define those settings.
Photo Playback Mode
The Playback Mode allows you to review and edit videos and photos that you‟ve already taken with you camcorder.
When you first turn on the camcorder, the camcorder will be in Video Capture mode by default.
Press the MODE button twice to open the Playback Mode.
The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
49
Advertisement
Table of Contents
