Settings/Supervisor level menu
Standard plus temp.
The pre-set temperature can be
changed in the Standard plus
programme. There are 4 different
temperatures to choose from.
40°C
60°C (factory default setting)
70°C
90°C
Pre-spin mops
In the Standard, Standard plus,
Thermal disinfection and Chemo
thermal disinfection programmes, wet
mops are spun briefly at the start of
the programme to remove surplus
water.
The machine is delivered with this
option activated.
66
Chemo thermal dis.
The pre-set disinfection process can
be altered in the Chemo thermal
disinfection programme. There is a
choice of 4 temperatures with
corresponding holding times.
40°C / 20 min
60°C / 20 min
70°C / 10 min (factory default setting)
71°C / 25 min
Thermal disinfection
The pre-set disinfection process can
be altered in the Therm. disinfection
programme. There is a choice of 2
temperatures with corresponding
holding times.
75°C / 10 min
85°C / 15 min (factory default setting)