Empty Sensor - Miele PW 5064 MopStar 60 Operating And Installation Instructions

The relays are activated as shown in
the chart. The containers must be
filled with the correct detergent or
agent in the order specified.
Do not use any detergents or agents
containing chloride or acids.

Empty sensor

When the Empty sensor is activated,
a message appears in the display to
show when an external liquid agent
container is empty (see Settings/
Supervisor level menu ).
If a container is empty, the following
message will come up in the display
before the start of the programme or
whilst the programme is running:
Fill the dispensing
i
container
OK
A programme that has already been
started will continue to run until it has
finished.
^ Press the OK button to delete the
message in the display, and refill the
container.
If a Disinfection programme is
running, the following message is
displayed:
Fault
i
Container empty
OK
The programme will be cancelled.
^ Press the OK button to delete the
message in the display, and refill the
container.
^ Start the programme again.
,
If the container is empty for a
disinfection programme, you have to
assume that no disinfection has
taken place. Start the programme
again.
Detergent
37