Table of Contents
Advertisement
SC-B6000 Series
User's Guide
Starting EPSON LFP Remote
Panel 2
Launch EPSON LFP Remote Panel 2 after confirming
that the printer displays Ready.
A
The application can be launched using either of
the following two methods.
❏
Double-click the EPSON LFP Remote Panel 2 icon
on the desktop. The EPSON LFP Remote Panel 2
icon is created when the application is installed.
❏
Click Start > All Programs (or Programs) > EPSON
LFP Remote Panel 2 > EPSON LFP Remote Panel
2.
B
Click the desired item in the EPSON LFP Remote
Panel 2 main window.
See EPSON LFP Remote Panel 2 help for more
information.
Exiting EPSON LFP Remote Panel
2
Click Exit in the EPSON LFP Remote Panel 2 main
window.
Introduction
Uninstalling Software
To remove the EPSON LFP Remote Panel 2 or EPSON
communications driver, follow the procedure below.
c
Important:
❏ You must log in with an Administrators group.
❏ Enter the Administrator password when
prompted and then proceed with the
remainder of the operation.
❏ Exit any other applications that may be
running.
A
Turn off the printer, and unplug the interface
cable.
B
Go to the Control Panel and click Uninstall a
program from the Programs category.
C
Select the software you want to remove and then
click Uninstall/Change (or Change/Remove or
Add/Remove).
Selecting the following deletes the Epson
communications drivers.
EPSON SC-B6000 Series Comm Driver Printer
Uninstall
Select EPSON LFP Remote Panel 2 to remove
EPSON LFP Remote Panel 2.
19
Advertisement
Table of Contents
