Onkyo TX-RZ610 User Manual page 43

> Specifications > Settings
■ 3� Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value
Front Left 12.0ft
Center 12.0ft
Front Right 12.0ft
Height Left (9.0ft)
Height Right (9.0ft)
Surround Right 7.0ft
Surr Back Right 7.0ft
Surr Back Left 7.0ft
Surround Left 7.0ft
Subwoofer 12.0ft
• Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you
can set between 0.03 m and 9.00 m in increments of 0.03 m.
> Listening Modes > Playback Function
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set in
"Configuration" - "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set in
"Configuration" - "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set in
"Configuration" - "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set in
"Configuration" - "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
■ 4� Level Calibration
Setting Item Default Value
Front Left 0 dB
Center 0 dB
Front Right 0 dB
Height Left (0 dB)
Height Right (0 dB)
Surround Right 0 dB
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Select a value between "－12 dB" and "＋12 dB"
(in 1 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
11