Table of Contents
Advertisement
●
HDMI Black
Level: This is available only for video input via an HDMI cable. Use this to reduce
image retention that may occur when watching video from an external device. Choose one of the
black levels.
Try Now
●
Film
Mode: Optimizes the picture quality for movies. Select the mode for watching movies. This
feature is only available when watching TV or when the input signal is AV, Component (480i,
1080i), or HDMI (1080i).
●
Auto Motion
Plus: Use this to reduce blur and shudder from scenes with rapid movement. If you
select Custom, you can configure the afterimage and screen trembling removal ratio and you can
view a sharper image through the
LED 6203 series and LED 6400 series or higher.
"
While
Auto Motion Plus
button to display the resolution and frequency of the incoming video signal (60Hz). The displayed
frequency is not the same as the frequency of the picture the TV is displaying when Motion Plus is
activated.
●
Analog Clean
View: (analog channels only) This function reduces diagonal noise in the picture
caused by signal crosstalk (interference). If your TV picture displays diagonal noise or distortion
when you watch, turn on this function.
●
LED Clear
Motion: Removes drag from fast scenes with a lot of movement to provide a clear
picture. This function is only available on the LED 4300 ~ LED 5500 series.
Try Now
LED Clear Motion
is running, select the Virtual Remote panel's or the regular remote's
Try Now
function. This function is available only with
INFO
Advertisement
Table of Contents
