Table of Contents
Advertisement
Schedule Recording / Timeshift
There is something wrong
with the TV.
The TV cannot recognize
the USB device or failing
Format
Device,
Check
Device, and
Device
Performance
Test.
There is a
messagesaying I need
toformat the USBstorage
device.
Schedule Recording
cannot be used.
I get a performance test
failure message and then
Schedule Recording
the Timeshift operation
stops working.
Refer to the USB device's manual and see if data can be stored on it. Check if
the USB device is in a locked state.
Check if the USB device was formatted when it was connected to a computer.
Formatting a USB device after connecting it to the TV may result in a formatting
failure. If
Device Performance Test
a problem with the USB device or its specifications. Try using a different USB
device.
Check if the USB device is in a locked state.
Use the USB recovery function to recover the USB device.
Check if there is a USB device connected to the TV.
Check if the channel is a digital channel that can be recorded. Recording will
automatically stop if the signal becomes too weak. The Timeshift function will
not work if there isn't enough storage space on the USB device.
This problem can occur when using a low-performance USB storage device that
and
does not support recording. A USB hard drive with a speed of 5,400rpm or above
is recommended. A USB memory Stick is not supported.
Try this!
or
Format Device
has failed, there may be
Advertisement
Table of Contents
