Plug & Play (Initial Setup) - Samsung PL43D450 User Manual

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the POWERP button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, press red button, and then press ENTERE.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 7).
1
Selecting the OSD
Language
2
Selecting the usage
mode
3
Setting the Clock
Mode
4
Selecting search
options for auto tuning
5
Selecting and
memorizing channels
6
Enjoy your TV
If You Want to Rerun Plug & Play...
O
MENU → System → Plug & Play → ENTERE
✎
NOTE
y To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume in the OSD, press and hold
Plug & Play (Initial Setup)
Press the ▲ or ▼ button to select a language. Press ENTERE twice
when done.
Press the ▲ or ▼ button to select, and then press the ENTERE button
twice.
y Select the Home Use mode. Store Demo mode is for retail
environments.
Set current date and time.
Press the ▲ or ▼ button to select Air or Cable, and then press ENTERE. A check
appears on your selection. Select Next, and then press the ENTERE button. You can
check both if you have both connected.
✎
If you selected Cable, you'll go to the Analog Cable System screen. Use the ▲ or ▼
button to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTERE. Most cable systems use STD.
✎
When done, select Next, and the press ENTERE.
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel → Auto Program in the e-Manual.
✎
Press the ENTERE button at any time to interrupt the memorization process.
Press the ENTERE button.
MENU
English - 8
for 5 sec.
POWER
P
IN