Teac R-5 Owner's Manual page 17

< If the unit is disconnected from the power
supply and the bat teries have been
completely discharged for about an hour,
clock and timer settings will be lost.
In case ALARM 2 overlaps ALARM 1:
Example:
ALARM 1 (Start time: 7:00, Source: FM)
ALARM 2 (Start time: 7:30, Source: AM)
If the timer settings overlap, the source
changes to the nex t specified source
automatically when the next setting time
comes.
In case of the example above, the unit turns
on at 7:00 with FM tuner selected, then the
source changes to AM tuner at 7:30. The unit
turns off at 8:30.
To check the timer setting
Press the corresponding ALARM (1 or 2)
button to check your timer setting.
The settings will be displayed one by one.
< This function will not work if no setting is
stored in memory.
< To exit the checking mode, press the ALARM
button repeatedly until the display returns
to normal mode, or leave the unit about 10
seconds.
17 17