Audio Adapter - Nextel i1000 PLUS User Manual

Plug the flat end of the power-supply cord, with the
1
facing down, into the receptacle labeled "Charging" on the
back of the charger.
Plug the transformer end of the power-supply cord into any stan-
2
dard AC wall outlet.
Insert an i1000plus phone with an attached battery, into the
3
charger's front pocket. This is done by inserting the bottom of
the i1000plus phone into the pin connector in the bottom of the
charger's front pocket.
4 If the i1000plus phone is properly seated in the front pocket, the
charger's front pocket LED indicator will light green to indicate
that the battery is being charged. If a battery is in the rear pocket
and the i1000plus phone with a battery is inserted into the front
pocket, the battery in the front pocket will charge to full capacity
before the battery in the rear pocket is charged. The LED for the
rear pocket will flash yellow, indicating that its battery is waiting
to be charged.
The charger has the capability of displaying the battery's charge
5
status. The indicator will show the following: solid red=1-30%;
solid yellow=31-60%; flashing green=61-90%; solid green=91-
100%.

Audio Adapter

NOTE: The use of wireless devices and their accessories ("devices")
may be prohibited or restricted in certain areas. Always obey
the laws and regulations on the use of these devices.
The Audio Adapter connects an earpiece microphone or headset to your
i1000plus phone for privacy and hands-free operation.
The Audio Adapter fits onto the bottom of the i1000plus phone and
provides a standard 2.5mm jack connection for an earpiece microphone
or headset.
104
www.nextel.com
logo