HP photosmart R725 User Manual page 44

Hide thumbs Also See for photosmart R725:
Table of Contents

Advertisement

Chapter 8
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory.
The Power light is on but the Image Display is off, or the camera seems stuck and
won't operate.
The camera responds sluggishly when trying to review images.
See
cards.
Video recording terminates abruptly. The video is saved successfully, but it is
shorter than expected.
Video recording terminates abruptly and the video will not play back.
Reformat the card (see
The camera gets warm (or even hot) to the touch.
This is normal. However, if anything seems out of the ordinary, turn off the camera,
remove it from AC power, and allow the camera to cool. Then examine the camera and
the battery for signs of possible damage.
For best image quality, turn off the camera when not using. Always store the camera in
a cool place.
My camera stalls when establishing a connection to the computer.
I cannot transfer images from the camera to my computer.
44
Downloaded From camera-usermanual.com HP Manuals
If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Use Image Advice (see Image Advice under
on page
25).
Press Live View/Playback
Reset the camera (see
Storage on page 53
and
Choose a lower resolution/compression combination for the video (see Video
Quality under
Using the Capture Menu on page
Replace your memory card with a faster card. Look for cards marked High
Performance, Pro, Ultra, or High Speed.
Install and format an optional memory card on page
Ensure that the USB cable is properly connected to the camera and computer.
Try connecting the USB cable to another USB port on the computer.
Turn the camera off, then on again. If that does not fix the problem, reset the camera
(see
Resetting the camera on page
If the problem persists, contact HP Support (see
Either install the HP Photosmart Software (see
see
Transferring images without HP Photosmart Software on page
Set your camera to act as a Disk Drive (see
on page
34).
to reactivate the Image Display.
Resetting the camera on page 41
Memory capacity on page 53
41).
Using the Playback Menu
).
for tips about memory
18).
Product support on page
Install the software on page
Connecting to the computer
8).
46).
8), or
33.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Photosmart r727

Table of Contents