Sony PXW-Z100 Operating Manual page 23

Displaying the Wi-Fi remote commander
The display size of the Wi-Fi remote commander
changes according to the device screen size
automatically.
1
Make a Wi-Fi connection between the
device and camcorder (page 20).
2
Launch the browser and input http://
<camcorder's IP address> ("System
menu" > "Wi-Fi" > "IP Address")/
rm.html in the address bar.
Example: When the IP address is 10.0.0.1,
input http://10.0.0.1/rm.html in the address
bar.
3
Input the user name and password
("System menu" > "Basic
Authentication" > "User Name" or
"Password") on the browser.
When completing the connection, the display
of the Wi-Fi remote commander appears on
the device.
Operate the Wi-Fi remote commander by
following the display.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device's
screen even though you input http://<camcorder's IP
address>/rm.html in the address bar. In this case, input
"rms.html" for a smartphone or "rmt.html" for a tablet
instead of "rm.html" at the end of the address to
display the Wi-Fi remote commander properly.
• The Wi-Fi remote commander on the device's screen
may no longer match the actual status of the camcorder
in the following cases. When this happens, refresh the
browser on the device.
—when the camcorder is restarted while the Wi-Fi
connection is established
—when the camcorder is controlled directly while
the Wi-Fi connection is established
—when the device is reconnected
—when you operate forward/backward on the
device's browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.
Compatible devices
The following devices, using the specified
versions or higher, can be used as Wi-Fi remote
commanders.
Device OS
Smartphone Android 4.0/4.1/
4.2
iOS 5
iOS 6
Tablet Android 4.0/4.1/
4.2
iOS 5
iOS 6
Using a USB Wireless LAN Module
Browser
Chrome V26
Safari 5
Safari 6
Chrome V26
Safari 5
Safari 6
23