Sony PXW-Z100 Operating Manual page 15

Storing the battery pack
If the battery pack is not in use for a while, run
down the battery and store it. See page 57 for
details on storage of the battery pack.
Charging time
Approximate time (minute) required when you
charge a fully discharged battery pack.
Normal charge
Battery pack
time
NP-F970 365
Notes
• You cannot use the NP-F570/NP-F770 battery pack
with your camcorder.
On the battery pack
• Before changing the battery pack, slide the POWER
switch to OFF.
Using a wall outlet (wall socket) as a
power source
You can use the AC Adaptor to obtain AC power.
DC IN
connector
To the wall outlet
(wall socket)
Full charge time
425
AC
Adaptor
AC-
NB12A
Power
cord
(mains
lead)
1.
Connect the power cord (mains lead) to the
AC Adaptor.
2.
Connect the AC Adaptor to the DC IN jack of
the camcorder.
3.
Connect the power cord (mains lead) to the
wall outlet (wall socket).
On the AC Adaptor
• Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the plug of the AC Adaptor
with any metallic objects. This may cause a
malfunction.
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
• You cannot charge the camcorder by
connecting it to the AC Adaptor.
Power Supply 15