Audiovox Pursuit PRO 9232S Owner's Manual
  1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Remote Starter
  5. Pursuit PRO 9232S
  6. Owner's manual
Audiovox Pursuit PRO 9232S Owner's Manual

Audiovox Pursuit PRO 9232S Owner's Manual

Pursuit series keyless entry alarm upgrade module owner's manual
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
KEYLESS ENTRY ALARM UPGRADE MODULE
Congratulations on your purchase of the PRO 9232S automotive Keyless Entry
Upgrade Alarm System. The PRO 9232S is a state -of -the-art auto security system
that is designed to automatically arm and disarm when it receives a command from
your existing Factory Keyless Entry Transmitter. Taking a few moments to read this
manual will help to ensure that your vehicle is protected at all times.
ARMING THE SYSTEM: (ACTIVE)
1.
Turn the ignition key off, exit the vehicle, and close all doors.
2.
Press and release the Lock button on the keychain transmitter.
3.
The siren and or horn will beep one time, the parking lamps will flash one
time, and the red dash mounted LED will begin to slowly flash, indicating
that the system is ARMED.
NOTE: If the unit beeps three times when arming, then one of the entry
points ( hood, trunk, or doors ) has been left opened. Closing the
hood, trunk, or door will correct the problem, and the system will
emit a single chirp to confirm that the problem has been corrected.
Additionally, if illuminated entry is a feature of the Factory Keyless
Entry system, the alarm may chirp 3 times every time the system is
armed, and chirp one additional time when the interior light turns off
to confirm that all trigger zones are fully operational.
4.
Any time the door lock switch in the vehicle is used to lock the doors while
the ignition key is turned off, the system will immediately arm. To lock the
doors after entering the vehicle, make sure the ignition key is switched on
first. Turning the ignition key on first will stop the system from arming.
ARMING THE SYSTEM: (PASSIVE)
1.
Turn the ignition key off, exit the vehicle, and close all doors.
2.
The dash-mounted LED will begin to flash rapidly, indicating that the
system is automatically ( passively ) arming. As an added convenience,
the 30 second automatic passive arming will not begin until all doors are
closed, allowing passengers to exit the vehicle at their convenience.
Model PRO 9232S
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Audiovox Pursuit PRO 9232S

Summary of Contents for Audiovox Pursuit PRO 9232S

  • Page 1 KEYLESS ENTRY ALARM UPGRADE MODULE Congratulations on your purchase of the PRO 9232S automotive Keyless Entry Upgrade Alarm System. The PRO 9232S is a state -of -the-art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.

  • Page 2: Protection While The System Is Armed

    In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed.

  • Page 3: Disarming The System

    DISARMING THE SYSTEM: As you approach the vehicle, press and release the unlock button on the keychain transmitter. The siren and or horn will beep two times, the parking lamps will flash two times, and the red dash mounted LED will turn off, indicating that the system is DISARMED.

  • Page 4: Using The Valet Switch

    USING THE VALET SWITCH: The valet switch allows you to temporarily bypass all alarm functions, eliminat- ing the need to hand your transmitter to parking attendants or garage mechan- ics. When the system is in valet mode, all alarm functions are bypassed, how- ever the remote panic feature and remote door locks will remain operational.

  • Page 5: Programming Your Custom Override Code

    Within 10 seconds of turning the ignition switch on, begin to enter units digit of override code. (In this example the code is 11, so press and release the Valet/Override pushbutton one time). Within 5 seconds after the last units digit is entered, turn the ignition switch off, then on, and start your vehicle.
  • Page 6 pattern reports the previously stored code, the new code was not entered correctly. Please repeat steps 1 through 7 above considering the following. NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.
  • Page 7 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last success fully stored code. ADDITIONAL REMOTE FUNCTION: This system allows the control of any one of the following optional accessories;...

  • Page 8: System Functions At A Glance

    PRO 9232S SYSTEM FUNCTIONS AT A GLANCE DASH L.E.D. INDICATORS RAPID FLASHING ... SLOW FLASHING ... OFF ... ON - SOLID ... 3 FLASH ... PAUSE ... 2 FLASH ... PAUSE ... 1 FLASH ... PAUSE ... CHIRP INDICATORS 1 CHIRP * ...

Table of Contents