Warning; Precautions - Sony BDP-S1100 Operating Instructions Manual

Hide thumbs Also See for BDP-S1100:
Table of Contents

Advertisement

WARNING

To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the appliance.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
The AC power cord (mains lead) must be changed
only at a qualified service shop.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this Blu-ray Disc/DVD player is harmful to
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective
housing inside the enclosure.

Precautions

• This unit operates on 110 V - 240 V AC,
50/60 Hz. Check that the unit's operating
voltage is identical with your local power
supply.
• Install this unit so that the AC power cord
(mains lead) can be unplugged from the wall
socket immediately in the event of trouble.
2
Precautions
This equipment has been tested and found to
comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 metres.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
• To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
• Do not expose the appliance to naked flame
sources (for example, lighted candles).
• Do not install this player in a confined space,
such as a bookshelf or similar unit.
• Do not place the player outdoors, in
vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
• Do not place heavy or unstable objects on
the player.
• Do not place any objects other than discs on
the disc tray. Doing so may cause damage to
the player or the object.
• Take out any discs from the tray when you
move the player. If you don't, the disc may
be damaged.
• Disconnect the AC power cord (mains lead)
and all other cables from the player when
you move the player.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents