Providing Customers With Units (Audio Mode); Turning Off - Sony STW-C140X Operating Instructions Manual

Providing
Customers with
Units (Audio Mode)
Before providing customers with units,
select the channel and audio (see page 13).
1
Connect the headphones to the
headphone jack of the receiver box.
2
Have the customer put on the
headphones.
Notes
• Any hearing aid should be removed before
wearing the headphones.
• Assistive audio is still audible at the
minimum volume.
14
GB

Turning Off

After the receiver box is returned from the
customer, turn it off.
1
Press and hold the POWER button for
about two seconds until the POWER
indicator starts blinking in amber.
2
Press the POWER button again.
The POWER indicator goes out and the
receiver box turns off.