Setting Up The Parental Control; Setting Up The Divx; Reference; Troubleshooting - Samsung DVD-C460 User Manual

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
Setting Up the Rating Level / Changing the Password
1. With the unit in Stop mode, press the MENU button.
2. Press the √/® buttons to select Parental Page, then press the † or ENTER button.
3. Press the π/† buttons to select Parental/Password, then press the ® or ENTER button.
4. Press the π/† buttons to select Rating Level you want, then press the ENTER button.
e.g) Setting up in KID SAFE.
5. Enter your password, If this is the first time, enter 0000. Then, enter a new password. The new
pass-word must be a number other than 0000 to activate the parental control function, then re-
enter the new password.
Note
ΠKID SAFE.
´ G (General Audiences) : All Ages Admited.
ˇ PG (Parental Guidance suggested) : Some material may not be suitable for young children.
¨ PG 13 (PG-13 Parents strongly cautioned) : Some material may be in appropriate for children
under 13.
ˆ PGR (Parental Guide Recommended) : These are not necessarily unsuitable for children, but
viewer discretion is advised, and parents and guardians are encouraged to supervise younger
viewer.
Ø R (Restricted) : Under 17 requires accompanying adult.
∏ NC17 (NC-17) : No one 17 and under admitted.
" ADULT.
Note
- If you have forgotten your password, see "Forgot Password" in the Troubleshooting Guide.

Setting Up the DivX

1. With the unit in Stop mode, press the MENU button.
2. Press the √/® buttons to select DivX Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note :
• Press Ok will make the registration code window disappear.
• DivX can only be accessed at stop mode.

reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.
Problem
• 5 .1 channel sound is reproduced only when the following conditions are met. :
5.1 channel
1) The DVD player is connected with the proper Amplifier
sound is not
2) The disc is recorded with 5.1 channel sound.
being repro-
duced.
• C heck whether the disc being played has the "5.1 ch" mark on the outside.
(DVD-C360R,
• C heck if your audio system is connected and working properly.
C370,C460)
• I n a SETUP Menu, is the Audio Output set to Bitstream?
The screen is
• Press the ■ / button (in front panel) for more than 5 seconds under no disc
blocked
inside. All settings will revert to the factory settings.
• Press the ■ / button (in front panel) for more than 5 seconds under no disc
Forgot password.
inside. All setings including the password will revert to the factory settings. Don't
use this unless absolutely necessary.
Action
13