Zooming In More Closely On Subjects (Digital Zoom) - Canon POWERSHOT A3300 IS User Manual

Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to to approximately 20x maximum
A3300 IS A3200 IS
subjects that are too far away for the optical zoom to enlarge.
However, depending on the recording pixel setting
the images may appear coarse (the zoom factor will appear in blue).
Zoom Factor
Turning off the digital zoom
To turn off the digital zoom, press the n button to choose [Digital Zoom] from
the 4 tab, then choose [Off].
The focal lengths when using the optical zoom and digital zoom together
are as follows (all focal lengths are 35mm film equivalent):
Approximately 28 – 560 mm (28 – 140 mm when using the optical zoom
alone)
Approximately 28 – 448 mm (28 – 112 mm when using the optical zoom
alone)
Downloaded From camera-usermanual.com Canon Manuals
, and approximately 16x maximum
Move the zoom lever toward i.
Move it toward i again.
A3300 IS A3200 IS
A2200
(p. 63)
Hold the lever until zooming stops.
Zooming stops at the largest possible
zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom lever.
The digital zoom will zoom in even further
on the subject.
A2200
and capture
and zoom factor,
57