Tips - Siemens EH8..KU1 SERIES Instruction Manual

Tips

Problem
The size or shape of the cookware is not displayed correctly
on the Touch display.
The hotplate power level cannot be increased.
The powerBoost function has been deactivated or cannot be
activated.
An audible signal sounds if there is an object on the touch
display.
The cookware is not detected.
The hob switches off automatically
The hotplate cannot be adjusted.
The hotplate settings are not transferred when the cookware
is moved.
The hob responds unusually or can no longer be operated
correctly.
Remedy
Differences in how the cookware is shown on the display are
normal and do not adversely affect the correct operation of
the hob (particularly small cookware is shown as a round
hotplate).
Two hotplates that are quite close to each other may be dis-
played as one hotplate. Redistribute the cookware.
Never place the cookware outside of the usable cooking sur-
face.
The overall output of the hob has been limited. Adjust the
overall output under "Power management" in the Options
menu.
Very large cookware may affect the maximum power level of
other hotplates on the same half of the hob. Redistribute the
cookware.
You can only activate the powerBoost function once on the
right and left-hand halves of the hob. If a second hotplate is
switched on or is already in operation, the powerBoost func-
tion will not be available or is deactivated and the hotplate
returns to power level 9.0.
The overall output of the hob has been limited. Adapt the
overall output under "Power management" in the Options
menu.
Remove the object and acknowledge the indicator on the
display. You can now reset the hob.
The cookware is outside the appropriate size. Sizes with a
diameter of 90 to 340 mm are suitable.
There may be liquid under the cookware. Ensure that the
base of the cookware is dry.
The cookware may not be suitable for induction cooking.
If no hotplate is in operation on the hob and you do not
change the settings for a prolonged period of time, the hob
will automatically switch off.
Only 2 hotplates can be in operation on each side of the
hob.
An item of cookware in the centre of the hob occupies one
hotplate on each side of the hob. You can only set one other
hotplate for each side of the hob.
The cookware may not be suitable for induction cooking.
Move the cooking container more slowly over the hob or use
the transfer function.
Switch off the appliance at the household fuse or circuit
breaker in the fuse box. Wait a few seconds and then switch
it back on.
17