Volvo S60 Owner's Manual page 79

Operation
NOTE
•
Only one of the power seat's controls can
be used at the same time.
•
The power seats have an overload pro-
tector that activates if a seat is blocked
by any object. If this occurs, switch off the
ignition (key in position 0) and wait for a
short period before operating the seat
again.
Power seat memory function
Power seat memory buttons
Button for storing a position
Button for storing a position
Button for storing a position
M (memory) button
Programming the seat's memory
Three different seating and door mirror positions
can be stored in the driver seat's memory.
The following example explains how button (1)
can be programmed. Buttons (2) and (3) are pro-
grammed in the same way.
To program (store) a seat and door mirror posi-
tion in button (1):
1. Move the seat (and door mirrors) to the
desired positions using the seat and mirror
adjustment controls.
2. Press and hold down the M (memory) button
(4).
3. With the memory button depressed, press
button (1) briefly to store the current position
for the seat/mirrors.
To move the seat and mirrors to the position
that they were in when a button was pro-
grammed:
–
Press and hold down button (1) until the
seat and mirrors stop moving.
INSTRUMENTS AND CONTROLS
NOTE
As a safety precaution, the seat will stop
automatically if the button is released before
the seat has reached the preset position.
Heated seats*
See Heated seats (p. 126).
Related information
•
Front seats (p. 75)
•
Rear seats – folding backrest (p. 81)
•
Rear seats – head restraints (p. 79)
* Option/accessory, for more information, see Introduction.
77