JVC KD-G120 Service Manual page 12

3.1.7 Removing the CD mechanism assembly
(See Fig. 7)
• Remove the front panel assembly, bottom cover, side panel,
rear bracket and main board.
Reference:
Remove the front chassis assembly as required.
(1) Remove the three screws H attaching the CD mechanism
assembly on the top chassis.
(2) Take out the CD mechanism assembly.
3.1.8 Removing the switch board
(See Figs.8 to 10)
• Remove the front panel assembly.
(1) Remove the four screws J on the back side of the front pan-
el assembly. (See Fig.8.)
(2) Release the joints f and remove the rear cover. (See Fig.9.)
(3) Release the joint g and take out the switch board from the
front panel assembly. (See Fig.10.)
1-12 (No.MA233)
CD mechanism assembly
Fig.7
J
J
Fig.8
Joints f
Rear cover
Joints f Joints f
Fig.9
Switch board
Joint g
Fig.10
H
Top chassis
H
J
Joints f
Front panel assembly