Starting / Stopping The Engine - Stihl FS 45 Instruction Manual

Starting / Stopping the
Engine
Controls
7 1 6
3
5 4
1 Stop switch
2 Throttle trigger lockout
3 Throttle trigger
4 Tongue of throttle trigger
5 Catch
Positions of stop switch
6 I – normal run position – the engine
is running or can start
7 0 – Stop – engine off – the ignition is
switched off
FS 45, FS 46
Starting
2
Move the stop switch to I.
N
Press down the throttle trigger
N
interlock and hold it there.
Squeeze the throttle trigger until the
N
catch on the tongue (4) can be
engaged on the housing (arrow).
Now release the throttle trigger,
N
tongue and trigger interlock in that
order. This is the starting throttle
position.
4
N
g if the engine is cold
e for warm start – also use this posi-
N
9
8
Set the choke lever (8) to
tion if the engine has been running
but is still cold.
Press the fuel pump bulb (9) at least
five times – even if the bulb is
already filled with fuel.
English
17