Sharp AL-1215 Service Manual page 52

17) Remove two screws and remove the fusing connector.
18) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
1)
19) Remove the screw and the E-ring, and remove the PS semi-circu-
lar earth plate and the PS roller unit.
20) Remove the E-ring and remove the spring clutch from the PS roller
unit.
4) 4)
PS roller unit PS roller unit
PS semi-circular PS semi-circuler
earth plate earth plate
1) 1)
2) 2)
3) 3)
4)
2)
2)
5) 5)
4) 4)
AL-1551CS DISASSEMBLY AND ASSEMBLY 8 - 12
21) Remove three screws and remove the TC front paper guide.
2)
22) Remove the screw and the connector, and remove the PPD1 sen-
sor PWB.
1)
2)
1)