Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic NN-SD377 Operating Instructions Manual

This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press Timer/More
2.
• Set desired amount of
Pop-Out and rotate
• Press Start.
3.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
• Enter the desired
Press 5 times
2. Set desired cooking time
using Pop-Out Dial.
Pop-Out and rotate
to 3 minutes
3.
• Press Timer/More
4.
• Set desired amount of
Rotate to 5 minutes
5.
• Press Start.
Timer Feature
once.
time using Pop-Out
Dial.
(up to 90 minutes).
➤Time will count
down without oven
operating.
Power Level (see
page 11 for directions).
once.
Stand Time using
Pop-Out Dail. (up to
90 minutes)
➤Cooking will start.
After cooking, stand
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and
re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at P6
power for 3 minutes.
1.
2.
Pop-Out and rotate
to 5 minutes
3.
Press 5 times
4.
Rotate to 3 minutes
5.
NOTE:
1. When each stage finishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep five times.
2. If the oven door is opened during
Stand Time, Kitchen Timer or Delay
Time, the time on the display will con-
tinue to count down.
3. Stand time and Delay start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
17
• Press Timer/More
once.
• Set desired amount of
delay time using Pop-
Out Dail. (up to 90
minutes)
• Enter the desired
Power Level (see
page 11 for directions).
Set desired cooking time
using Pop-Out Dial.
• Press Start.
➤Delay time will count
down. Then cooking
will start.