Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic NN-SD688 Operating Instructions Manual

Hide thumbs Also See for NN-SD688:
Table of Contents

Advertisement

Available languages

Available languages

IP1802_38X10CP_14_080327
This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press Timer.
2.
Time Dial
• Set time, using Time
Push & rotate
3.
• Press Start.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
• Enter the desired
Press 5 times
2.
• Set cooking time,
Time Dial
Push & rotate
3.
• Press Timer.
4.
Time Dial
• Set stand time, using
Push & rotate
5.
• Press Start.
2008.3.27
Timer Feature
Dial, to 5 minutes.
➤Time will count
down without oven
operating.
Power Level (see
page 14 for direc-
tions).
using Time Dial, to 3
minutes.
Time Dial, to 5 min-
utes.
➤Cooking will start.
After cooking, stand
time will count down
without oven
operating.
15:29
Page 23
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
grammed. Stop oven immediately and
re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at P6
power for 3 minutes.
1.
2.
Time Dial
Push & rotate
3.
Press 5 times
4.
Time Dial
Push & rotate
5.
NOTE:
1. When each stage finishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep five times.
2. If the oven door is opened during
Stand Time, Kitchen Timer or Delay
Time, the time on the display will con-
tinue to count down.
3. Stand time and Delay Start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 90 minutes.
21
• Press Timer.
• Set delay time, using
Time Dial, to 5 min-
utes.
• Enter the desired
Power Level (see
page 14 for direc-
tions).
• Set cooking time,
using Time Dial, to 3
minutes.
• Press Start.
➤Delay time will
count down. Then
cooking will start.

Advertisement

Table of Contents
loading

Table of Contents