Stihl MS 150 TC Instruction Manual page 6

English
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing with
cut retardant inserts for
the feet, legs and fore-
arms – a safety
combination, not a coat.
Avoid clothing that could get caught on
branches or brush or moving parts of the
saw. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear steel-toed safety
boots with cut retardant
inserts and non-slip
soles.
WARNING
To reduce the risk of eye
injuries, wear snug-fitting
safety glasses in accord-
ance with European
Standard EN 166. Make
sure the safety glasses
are a good fit.
Wear a face shield and make sure it is a
good fit. A face shield alone does not
provide adequate eye protection.
Wear hearing protection, e.g. earplugs
or ear muffs.
Wear a safety hard hat with chin strap
where there is a danger of head injuries
from falling objects.
4
Wear heavy-duty work
gloves made of durable
material (e.g. leather) –
with cut-retardant inserts.
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Use personal fall protection equipment.
Use only certified equipment that is
suitable for the application concerned.
Check the condition of the equipment
before each use and replace any
damaged parts.
Transporting
Always stop the engine, engage the
chain brake and fit the chain guard
(scabbard) before carrying the saw short
distances. This avoids the risk of the
chain running unintentionally.
Always carry the saw by the control
handle – with the hot muffler away from
your body – the guide bar must point to
the rear. To reduce the risk of serious
burn injuries, avoid touching hot parts of
the machine, especially the surface of
the muffler.
In vehicles: Properly secure your saw to
prevent turnover, fuel spillage and
damage.
Cleaning
Clean plastic parts with a cloth. Harsh
detergents can damage the plastic.
Clean the dust and dirt off the machine –
do not use any grease solvents for this
purpose.
Clean the ventilation slots if necessary.
Do not use a high-pressure cleaner to
clean the machine. The hard jet of water
can damage parts of the machine.
Accessories
Only use those tools, guide bars, chains,
chain sprockets, accessories or
technically equivalent components that
have been approved by STIHL for this
machine. If you have any questions in
this respect, consult a servicing dealer.
Use only high quality tools and
accessories. Otherwise, there may be a
risk of accidents and damage to the
machine.
STIHL recommends the use of genuine
STIHL tools, guide bars, chains, chain
sprockets and accessories. They are
specifically designed to match your
model and meet your performance
requirements.
MS 150 TC