4
2
3
Push the hand guard (1) forward –
N
the chain is locked.
Press down the trigger lockout (2)
N
and pull the throttle trigger (3) at the
same time. Set Master Control
lever (4) to starting throttle
position (n).
Set choke lever to required position.
N
Choke shutter closed (l)
if the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
MS 150 TC
Choke shutter open (j)
1
if the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
When engine begins to fire
Move the choke lever to the open
N
position (j).
Hold and start your saw as
N
described.
As soon as the engine runs
4
3
Press down trigger lockout and the
N
blip the throttle trigger (3) – the
Master Control lever (4) moves to
the run position (F) and the engine
settles down to idling speed.
Pull the hand guard toward the
N
control handle to disengage the
chain brake.
English
21