Mitsubishi Electric XD221U Service Manual page 42

ITEM
LPF
SHUTTER(U)
SHUTTER(L)
SHUTTER(LS)
SHUTTER(RS)
*1) Setting range differs depending on the input signals.
• Some commands are not executed depending on the input signal. The operational restrictions same as those
on the menu setting are applied. Refer to "Menu operation" in the User Manual for more details.
How to set the value
Use the character or ASCII code as shown below to set the value.
Character +
ASCII '2Bh' '2Dh'
[Example 1] When setting the AUTO POWER ON to ON. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '41' '50' '4F' '4E' '31' '0D'
00APON1
[Example 2] When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and
the CONTRAST B to -5. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '50' '2B' '31' '30' '2B' '30' '30' '2D' '30' '35' '0D'
00P+10+00-05
[Example 3] When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks
are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '53' '0D'
00S
[Example 4] When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Values enclosed
in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
Function
Character
LPF 4Ch 50h 46h
SHU 53h 48h 55h
SHL 53h 48h 4Ch
SHLS 53h 48h 4Ch 53h
SHRS 53h 48h 52h 53h
- 0 1 2
'30h' '31h' '32h'
'30' '30' '41' '50' '4F' '4E' '31' '0D'
00APON1
'30' '30' '50' '2B' '31' '30' '2B' '30' '30' '2D' '30' '35' '0D'
00P+10+00-05
'30' '30' '53' '2B' '31' '30' '0D'
00S+10
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
ASCII
0 (OFF), 1 (ON)
00-20
00-20
00-20
00-20
3 4 5
'33h' '34h' '35h'
Status code returned
from the projector
Status code returned
from the projector
Status code returned
from the projector
Status code returned
from the projector
9
Data
6 7 8
'36h' '37h' '38h' '39h'
Description
Command for setting the AUTO
POWER ON to ON
Command receipt confirmation
(Command echo back)
Description
Command for setting the picture
control
Command receipt confirmation
(Command echo back)
Description
Command for checking the TINT
setting
Check result (+10)
Description
Command for setting the picture
control
Command receipt confirmation
(Command echo back)
9