Mitsubishi Electric XD221U Service Manual page 33

) When download is completed (about  minutes and 0
seconds), it will be displayed on the portion of Status as
"Download Complete." Since initialization is automatically
begun here when EEPROM is a new article, don't shut off
the main power supply. STATUS LED lights up in red dur-
ing initialization of EEPROM.Initialization of EEPROM will
be completed if "POWER" LED carries out red / green mu-
tual blink.
Download Complete should be displayed
8) Turn OFF the main power supply and extract a USB cable.
note ) When the main power supply is OFF, carry out
cable removal of USB.
note ) Do not ON/OFF the main power supply dur-
ing communication. Please reboot a personal
computer, when communication is interrupted. It
hangs-up.
note ) At the time of the write error to FLASH ROM, an
error occurs on a personal computer.
note ) When a write error carries out continuation gen-
erating, reboot a personal computer once and
repeat from  again.
- 0 -