M-Audio black box User Manual page 17

During the installation, you will be prompted with a message warning that the driver software has not passed Windows Logo testing.
Select "Continue Anyway" and proceed with the installation.
Once the installer has finished copying the files, you will see the "Installation Successful" screen. Click FINISH.
Plug your USB cable into your Black Box, and then plug the other end of the USB cable into the computer.
Your computer will pop up a "new hardware found" message indicating your Black Box is now installed and ready to use.
You will see the M-Audio Black Box control panel icon in your system tray (lower right corner of your desktop). Double-click on the
icon to open the Black Box control panel.
In your Windows XP control panel, double-click on the Sounds and Audio Devices icon. You should see the screen below. If the Black
Box does not show up automatically, use the drop down menu to select it. If the device is not available, restart your computer and
try again.
Skip to the Control Panels section following the Mac installation instructions.
19