Panasonic CF-35 Operating Instructions Manual page 24

Add-ons/Peripherals
Adding Memory
RAM module specifications
144 pins, 60/70 ns, 3.3 V,
SO-DIMM, EDO
3
2
1
RAM Module Slot
1
1
2
24
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where static
electricity generated by the human body has adversely affected such modules. In addi-
tion, it is easy to damage the RAM modules or internal components of the computer.
Therefore, when installing or removing a RAM module, handle the module with extreme
care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
CAUTION
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
2
Remove the memory cover after removing the screw holding
1
it in place
Turn your computer over and use a screwdriver to remove the screw.
CAUTION
Do not touch the terminals or internal components, insert objects other than the
module, or allow foreign particles to enter. Doing so has been known to cause
damage, fire or electric shock.
3
Installing the RAM module
Slide the module in at an angle.
1
2
Snap the module into place by pushing it down.
2
Removing the RAM module
Open the left and right hooks.
1
2
2 Gently remove the RAM module from the slot.
Hooks
4
Put the cover back into place, then fasten the screw
3
5
Turn your computer on
( page 10)