Use Timer - Philips 32PHT5100 User Manual

[Reinstall TV]: Restore default setup
•
and go back to installation wizard menu.
Changing picture format
1
Press (Home), then select Setup to
enter the setup menu and select [Settings].
2
Press to
3
Select a picture format.
4
Press OK to confirm.
Summary of picture formats
Configuration of the picture setup listed below.
Notes
•
Some picture setups may be unavailable due to
differences between picture signal formats.
[16:9]: Change the normal
ratio to widescreen format.
[4:3]: The normal format.
[Zoom 1]: Horizontal
scaling of the widescreen
picture format. When this
format is used, the two
edges of the picture frame
will be partly cut off.
[Zoom 2]: Set the normal
ratio to widescreen format.
(Only 16:9, 4:3, and Point
to Point are available in PC
mode).
[Point to Point]: Used for
HDMI connections on PCs.
Will display the PC's full
screen in order to achieve
the best display effect.
select [Picture Format].

Use timer

You can set the timer to switch the TV to
standby mode at a set time.
Tip
•
Before using the timer, please set the sleep timer.
Setting the sleep timer
Tip
•
You can turn the TV off earlier, or reset the sleep timer
before the TV switches off.
1
Press (Home), then select Setup to
enter the setup menu and select [Settings].
2
Press to
3
Press You can select a time for the
sleep timer to turn the TV off.
» The longest time that can be set for
the sleep timer is 180 minutes.
TV lock
By locking the TV remote control, you can
prohibit children from watching specific
programs or channels.
Setting or changing your password
1
(Home), then select Setup to
Press
enter the setup menu and select [Parental].
2
Use the number buttons on the remote
control to enter a password.
3
Select (Change Password) and follow the
instructions on screen.
Locking channels
1
Press (Home), then select Setup to
enter the setup menu and select [Parental].
2
Enter the password and select [Channel
Lock].
Select [Sleep Timer].
EN
11