Setting the Clock
step 1:
Press and hold the Clock Button.
step 2:
While holding the Clock Button press the Hour and minute Buttons to adjust the hour
and minute.
step 3:
Release the Clock Button once the correct time is set.
Setting the Alarm
step 1:
Press and hold the Alarm set Button.
step 2:
While holding the Alarm set Button press the Hour and minute Buttons to adjust the
hour and minute.
step 3:
Release the Alarm set Button once the correct time is set.
step 4:
Adjust the source switch (Aux In/Buzz, iPod/Buzz, FM, AM) to the desired mode.
step 5:
Press the Alarm On/Off Button to turn the alarm on.
•
When set and turned on, a small alarm indicator icon will appear on the LCD display.
Connecting & Playing an iPod
step 1:
Connect an iPod to the unit by inserting the Headphone Type Pin into the iPod's
headphone jack.
step 2:
Adjust the source switch (Aux In/Buzz, iPod/Buzz, FM, AM) to iPod Mode.
step 3:
Use the iPod's native controls to select and play music.
•
Please note, this unit will not charge the connected iPod.
Tuning the Radio
step 1:
Press the Power Button to turn the unit on..
step 2:
Adjust the source switch (Aux In/Buzz, iPod/Buzz, FM, AM) to the FM or AM position.
step 3:
Turn the Tuning Dial to the desired station.
step 4:
Adjust the FM Antenna to improve FM radio reception.
•
An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Using the Auxiliary Input
step 1:
Connect an MP3 player or other audio source to the Auxiliary Input.
•
This requires a 3.5mm auxiliary input cable, not included.
step 2:
Press the Power Button to turn the unit on.
step 3:
Adjust the source switch (Aux In/Buzz, iPod/Buzz, FM, AM) to the Aux In position.
step 4:
Audio played from the connected MP3 player or other audio source will now be heard
through the unit's speakers.
5