Download Print this page

Battery Backup; Setting The Clock; Setting The Alarm; Time Zone - GPX C303B v997-01 User Manual

Clock radio with dual alarm

Advertisement

Battery Backup

The battery backup is intended for short power outages only.
The clock radio's primary functions cannot run off of the battery
backup alone. This unit uses a button cell battery that will last up
to 1 year and maintains the time. Replace the battery if the low
battery indicator lights up.

SETTING THE CLOCK

Auto
When the unit is plugged in, the correct time will be displayed
after a few seconds.
Manual
1.
Press and hold the Clock button until the display
begins flashing.
Press the Hour and Minute buttons to adjust the time. The
2.
PM indicator will light when the hour is set in the PM.
3.
Press the Clock button again set the day of the week. Press
the Hour and Minute button to adjust the day from 1 to 7.
Example: 1 - Monday, 2 - Tuesday, etc.
4.
Press the Clock button again to finish, or wait for the display
to stop flashing.
Daylight Savings Time
On the rear of the unit is a switch marked DST ON/OFF.
In the ON position, the time on the clock is moved ahead
one hour. In the OFF position, it is moved back one hour.
RADIO

Radio Reception

Adjust the position of the FM Antenna to improve FM radio
reception. An AM antenna is built into the clock radio. To improve
AM radio reception, adjust the position of the clock radio.
Tuning the AM or FM Radio
Power on the radio by pressing the Power button. Press it
1.
again to switch between the AM and FM radio mode.
Press the Tunning ± buttons to find the desired
2.
radio frequency.
3.
Press the Volume ± buttons to adjust the volume
of the radio.
ALARM

Setting the Alarm

1.
With the radio off, press and hold the AL1 or AL2 buttons to
set the time for Alarm 1 or Alarm 2.
2.
The screen will flash and display the time the alarm is set to
go off. Press the Hour and Minute buttons to change the
desired time. Note the PM indicator.
3.
With the screen still flashing, press the AL1 or AL2 buttons
again to set the weekly alarm schedule.
1-7 rings Mon-Sun | 1-5 rings Mon-Fri | 6-7 rings Sat-Sun
INTERNATIONAL SUPPORT
To download this User's Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.gpx.com
Pour télécharger ce guide de l'utilisateur en anglais,
espagnol ou français, ou pour obtenir des réponses à
des questions fréquemment posées, consultez la rubrique
d'assistance sur: www.gpx.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.gpx.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Bottom View

Time Zone

When the unit is first powered on, it is automatically set to Time
Zone 2 - Eastern Standard Time. To change this setting, press the
Time Zone button to select the desired time zone.
1
2
3
4
5
6
7
Saving a Station as a Preset
1.
With the radio on, tune to your desired frequency, press and
hold the Preset button until the screen flashes.
Press the Tunning ± buttons to choose the desired preset
2.
station, 1 though 10.
3.
Press the Preset/Clock button again to set the frequency to
that preset station.
4.
The unit will store 10 FM and 10 AM radio station presets.
Once set, press the Preset/Clock button to cycle through
your preset stations.
4.
After the alarm is set and the screen has stopped flashing,
press the AL1 or AL2 buttons again to select how the alarm
will sound with the Buzzer or the Radio. Press once more to
deactivate the alarm entirely.
Snooze and Alarm Reset
After the alarm sounds, press the Snooze button to delay the alarm
for an additional 9 minutes, or press the Power button to turn the
alarm off until the set alarm time is reached again.
RELEASE
CR2032
Atlantic Std Time
Eastern Std Time
Central Std Time
Mountain Std Time
Pacific Std Time
Alaska Std Time
Hawaii - Aleutian Std Time
CR2032 Button Cell
Battery (included)
UTC- 4 hrs
UTC- 5 hrs
UTC- 6 hrs
UTC- 7 hrs
UTC- 8 hrs
UTC- 9 hrs
UTC- 10 hrs

Hide quick links:

Advertisement

loading