Test The Network Connectivity - TP-Link Archer C20 User Manual

Chapter 11
2. Set the current Date
3. Set the current Time
4. Click Save.
¾ To set up Daylight Saving Time:
1. Select Enable Daylight Saving
2. Select the correct Start
time zone.
3. Select the correct
time zone.
4. Click Save.

11. 2. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
(In MM/DD/YYYY format).
(In HH/MM/SS format).
Time.
date and time when daylight saving time starts at your local
End date and time when daylight saving time ends at your local
System Tools > Diagnostics.
or Traceroute as the diagnostic tool to test the connectivity;
Manage the Router
61