Exterior Lamp Controls; Lighting - Cadillac ATS 2017 Owner's Manual

Hide thumbs Also See for ATS 2017:
Table of Contents

Advertisement

158

LIGHTING

Lighting
Exterior Lighting
Exterior Lamp Controls . . . . . . . . . . 158
Changer . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . 160
Lamps (DRL) . . . . . . . . . . . . . . . . . . . . 160
Lighting (AFL) . . . . . . . . . . . . . . . . . . 161
Hazard Warning Flashers . . . . . . . . 161
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Control . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Courtesy Lamps . . . . . . . . . . . . . . . . . . 163
Dome Lamps . . . . . . . . . . . . . . . . . . . . . 163
Reading Lamps . . . . . . . . . . . . . . . . . . . 163
Entry Lighting . . . . . . . . . . . . . . . . . . . . 164
Exit Lighting . . . . . . . . . . . . . . . . . . . . . . 164
Battery Power Protection . . . . . . . . 164
Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Exterior Lighting

Exterior Lamp Controls

The exterior lamp control is on the
turn signal lever.
Turn the control to the following
positions:
: Turns off the exterior lamps. The
knob returns to the AUTO position
after it is released. Turn to
reactivate the AUTO mode.
In Canada, the headlamps will
automatically reactivate when the
vehicle is shifted out of P (Park) on
automatic transmission vehicles, and
when the parking brake is released on
manual transmission vehicles.
AUTO (Automatic) : Automatically
turns the exterior lamps on and off,
depending on outside lighting.
: Turns on the parking lamps
including all lamps, except the
headlamps.
: Turns on the headlamps together
with the parking lamps and
instrument panel lights.
IntelliBeam
If equipped, this system turns the
vehicle's high-beam headlamps on and
off according to surrounding traffic
conditions.
The system turns the high-beam
headlamps on when it is dark enough
and there is no other traffic present.
An indicator light
again to
Auto Stop) or
comes on in the instrument cluster
when the IntelliBeam system is
enabled.
Turning On and Enabling IntelliBeam
To enable the automatic high-beam
system, with the turn signal lever in
the neutral position, turn the exterior
®
System
(Cluster with
(V-Series Cluster)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-v 2017

Table of Contents