Omron M6 Instruction Manual page 25

HEM-7001-ARU.book Page 25 Thursday, January 8, 2009 9:55 AM
Problem
No display appears
when the O/I START
button is pressed.
Cannot measure or
readings are too high.
The blood pressure is
different each time. The
reading is extremely low
(or high).
Cause
The batteries are empty.
Is the cuff wrapped
firmly around the arm?
The cuff pressure does
not rise although the
pump motor can be
heard.
Blood pressure readings constantly vary with time
of measurement and nervous condition. Take deep
breaths to relax before taking a measurement.
5.Handling Errors and Problems
Remedy
Replace the batteries.
Attach the arm cuff cor-
rectly.
Check that the air plug
is properly connected to
the monitor. Push the air
plug firmly into the air
jack.
25
EN