Installing The Door Station - Panasonic VL-GC001A Installation And Operation Manual

Installing the door station

Make sure to install the door station on a flat, vertical wall.
Important information:
On the bottom surface of the door station, there is a hole to allow water to drain. Do not
cover it up when installing.
1
Unscrew the hex-head screw using the longer end of the allen wrench and remove the
mounting bracket from the rear of the door station.
L The pin hole camera is not a screw to be touched or removed.
Pin hole camera
Hex-head screw
(Attached to the door station)
Allen wrench
Introduction and Installation
Mounting bracket
9