Panasonic VL-GC001A Installation And Operation Manual page 10

Introduction and Installation
2
Attach the mounting bracket to the wall using the wood screws (3.8 mm x 20 mm,
1 13
/ '' x / '').
8 16
L Before drilling, see page 7 for installation location.
Wood screws
3
Connect the wires that connect to the monitor station to the terminal connector by
unscrewing the screws, pushing in the wires, then tightly fastening the screws.
L See page 8 for the wire type and distance.
L You can change the camera angle using the camera angle control lever. See page 7 for
details.
Terminal connector
(Non polar)
Screw
10
Mounting bracket
Camera angle control lever
Wire (Not included)
83.5 mm
5
(3 / ")
16
Wall