Avaya 9400 series User Manual page 43

Set to On to enable AGC on the speaker or set to Off to disable AGC on the speaker.
The default setting is On.
d. To set the Speaker Open option to Standard, More, or Less, scroll to this option, and
then do one of the following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to Standard to provide acceptable performance in most room environments; set to
More for a quiet room that has little echo; or set to Less for a noisy room that has echo.
The default setting is Standard.
e. To turn the Headset Xmit NR option on or off, scroll to this option, and then do one of
the following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to On to enable headset transmit noise reduction or set to Off to disable headset
transmit noise reduction. The default setting is On.
f. To turn the Headset RCV Loud option on or off, scroll to this option, and then do one of
the following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to On to set the headset receive volume louder or set to Off to set the headset
receive volume softer. The default setting is Off.
g. To turn the Headset CC option on or off, scroll to this option, and then do one of the
following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to On to enable the call center audio mode or set to Off to disable the call center
audio mode. The default setting is Off.
February 2016
Setting audio levels on the handset, headset, and speaker
Avaya 9400 Series Digital Deskphone User Guide
Comments on this document? infodev@avaya.com
43